The Evo 5 IP LED is our new incremental processor with integrated main and back LED exposure unit in the size 132 x 203 cm (52x80 inch). The LED exposure system allows a simultaneous back and main exposure of the plate , then automatically transferred to the washout section.
The use of high UV output LED’s, is seen as the next level of improvement into the demanding design challenge facing the graphic art and packaging world. The unit has all the features of all Vianord processors, such as a pre-wash section for digital plates with a separate tank for the black layer. The Evo 5 version is almost 50cm longer than the Evo 4 IP LED. During the washout the plate moves at a constant speed along the whole  process. This unit is compatible with the Easy to Plate™ system.

Evo5 IP LED

 

horz lineseparator

 

PLATE ENTRANCE SECTION:

evo5 processor features

  • The Plate holder at the bottom of the machine allows the user to store rolled plates to avoid any damage and have them ready to use.

  • The Pin bar storage section can carry up to 8 pin bars.

  • The integrated automatic rollaway punch automatically opens when the front lidis opened. Then it is enough to position the plate in the device to have it pierced with precision. The number of times the punch pierces the plate is programmable according to the user's preferences. 

 

LED EXPOSURE SECTION: 

  • Perfect flat top dots together with an extremely fast exposure - approximately 10/15 minutes (depending on plate sensitivity)
  • No need to flip the plate between back and main exposure: less plate handling, shorter processing time, less risk of plate damaging
  • User friendly interface: adjustable UVA output and transfer speed
  • 48 channels are available to memorise different plate parameters
  • Extremely stable, repeatable results for both back and main exposures
  • Double cooling system (water + air circulation) to ensure the cooling of both the plate and the LEDs

WASHOUT SECTION:spazzole EVO5 280x186

  • Digital washout with separate pre-wash section to prevent contamination
    of the main washout solvent with black layer
    • 2 pre-wash brushes (oscillating and rotating)
    • 10 washout brushes (oscillating and rotating)
    • 1 top cleaning brush (oscillating and rotating)
    • 1 wiping brush (oscillating and rotating)
    • 2 back cleaning brushes (rotating)
  • New volumetric pump and sensitive pressure sensor allow a higher precision solid content analyzer
  • Automatic solvent replenishment system
  • Fresh solvent consumption control over the machine life cycle and programmable over a time frame
  • Fresh solvent flow regulation option on the touch screen
  • Constant solvent temperature thanks to water circulation serpentine
  • The new "3D Brush Motion" system with servo drive motors enables a soft mechanical start 
  • which results in less vibrations and a much more quiet 3Dmachine. It also provides a constant and repetible washout speed; in fact, the new system, adjustable from the display, automatically synchronizes the brushes rotation and oscillation speed to the plate transfer speed; so that bristles hit the plate, thin or thick, always at the same speed

 

horz lineseparator

 

touchscreen evo 4/5

OTHER FEATURES:

  • 30 x 30 rotating and tilting touch screen display
  • Programmable automatic solvent warmup
  • Automatic standby after the last plate processed
  • Remote access (optional)
  • Active component visualisation during the process
  • Manual function to run the components separately
  • Memorisation of the plate process parameters (up to 24 channels)

 


horz lineseparator

 

evo5 ip led tech data