The EVO 4 IP system can be used as stand-alone unit or as core module of an Easy to Plate™ system EVO 4 IPD or EVO 4 IPI.

It features an incremental washout unit (Plate Processor) and internal integrated punch.

It is designed to process solvent-washable, polyester-backed, analogue and digital plates up to a size of 120 x 160 cm (47x63 inch) and thickness up to 7 mm (0.276 inches).

The standard version is equipped with a stress-accumulation early-warning-system and may be equipped with optional tools to enable remote-monitoring and remote-diagnostics.
General Features

CE Certification

The  equipment is designed and manufactured according to the EEC safety and health standards, as specified in the Type Examination Certificate No. MA19-0042548-01 (310) issued by IMQ spa – Via Quintiliano 43 – 20138 Milan ITALY, and on the basis of the verifications carried out according to the essential requirements of the Directive 2006/42/EC, the system respects and is in compliance with all the applicable points.

General Features

General Features

This PLC controlled, incremental processor is specifically designed for high quality digital and conventional photopolymer solvent-washable plates.

General Features


This unit can be used as core module to a fully automate Easy to Plate™ system.

One of the most important feature of the Easy to Plate™ is the modularity concept, in other words, each unit is an independent piece of equipment buyable separately with the possibility of being upgraded and attached to one other to compose an all-in-one automatic unit. This gives you two choices: buy the whole automatic line at once, or amortize the investment and buy the different units over a longer time frame.


This System is suitable for analogue and digital, polyester backed, solvent-washable photopolymer Flexo plate.

It is designed to work in a standard “drum-to-drum” configuration where fresh solvent is supplied to the washout unit from a drum and the saturated dirty solvent is pumped from the unit to a recovery drum. It has been tested with conventional alternative solvents, with flashpoint above 62°C (144°F). The system's installation kit includes two Ø 16 mm - 5 mt solvent hoses with fittings, one level switch for the fresh solvent drum and another for the used solvent drum. Please note that if you intend to use  this system with permanently installed tanks, special level switches may be required.



PLC driven system designed to process solvent-washable, polyester-backed, analogue and digital plates up to a size of 120 x 160 cm (47x63 inch) and thickness up to 7 mm (0.276 inches).

Production Data Recording

This Vianord systems offer the opportunity to benefit from extensive production data collected directly from the platemaking system. Your production data can easily be turned into actionable information. You will be able to build reports customized for your own production needs to calculate and display operations data throughout your organization. Platemaking operations that are operated and maintained based on actionable information are more reliable and more profitable.

Stress-Accumulation Early-Warning

The system provides Early Alerts when the time to replace an over-stressed part, causing too much risk, has come. This innovative function allows users to intentionally replace parts that are tired, aged, and degraded just before they fail. More than one hundred parts, critical to the uptime of the system, have been identified and data relative to their maximum-lifetime-expectations stored in the software.

Remote Diagnostics

Remote-Monitoring and Remote-Diagnostics (to be purchased separately); The concept of automation symbolises high quality and productivity, so ensuring you experience minimal downtime, for Vianord is essential. For that reason, this EVO system may be fitted with an Industrial VPN Gateway - EWON COSY 131 - designed to offer Vianord Certified Engineers remote access, across the Internet. This innovative system will help you keep uptime high, maintenance costs low, and extend the system’s useful life.

System Dimensions (net)

Washout Unit: 269 x 220 x 115 cm - (105.9 x 86.6 x 45.3”)
Exit Table: 214 x 220 x 115 cm- (84.33 x 86.6 x 45.3”)

Total System: 483 x 220 x 115 cm- (190 x 86.14 x 75.43”)


System Weight (net)

Washout Unit: 1860 Kg - (4100 Ib)
Exit Table: 650 Kg - (1430 Ib)

Total System:  2510 Kg - 5530 lb)

Packing Dimensions

Light Packing on Pallets is preferred and recommended when the system requires a full truckload and is shipped just within Europe. 
Washout Unit: 3000x2500x1500 mm - (118.11x98.43x59.06”)
Exit Table: 2450x2500x1500 mm - (96.46x98.43x59.06”)

Industrial Wooden Crates are favoured if the system must withstand multiple transhipments during transport and is mandatory when shipped outside the continent. 
Washout Unit: 3060x2260x1590 mm (120.47x88.98x62.59”)
Exit Table: 2580x2260x1590 mm (101.57x88.98x62.59”)

The dimensions mentioned above are for reference only; packaging dimensions may vary depending on the packing company hired for the job.

Packing Weight

Light Packing on Pallets
Washout Unit: 1665Kg (3670Ib)
Exit Table: 845Kg (1873Ib)

Industrial Wooden Crates
Washout Unit: 1765Kg (3891Ib)
Exit Table: 925Kg (2039Ib)

The weights mentioned above are for reference only; packaging waight may vary depending on the packing company hired for the job.

Mains Electricity

Power Supply (field configurable)
360 / 440 Volt – 50 / 60 Hz - 3Ph / N / PE   -   207 / 243 Volt – 50 / 60 Hz - 3Ph / PE

Current (nominal load)
12 A (360/440 Volt configuration)   -   21 A (207/243 Volt configuration)

Power Rating (nominal)
7.5 Kw

Connecting Wires
5 x 4 mm2 (360/440 Volt configuration)   -    4 x 6 mm2 (207/243 Volt configuration)



< 0.1 Ω

Compressed Air Supply

To perform to the best of its possibilities, the system requires a continuous and stable supply of compressed air at a pressure of at least 7 bar (101.5 psi) and not more than 10 bar (145 psi), with pressure dew point 3°C and max. residual intake oil content of < 0.01 mg/m3. Consider also an average consumption of 70 l/hr. The system installation kit includes a 5-meter - Ø 6mm air connecting pipe for push-in fitting.



The unit is equipped with a well-designed exhaust system that collect and conveys vapours and fumes from the different sections the machine and discharge them as quickly and silently as possible. The blower in the systems has sufficient power to vent the entire equipment when the tube supplied is connected directly to a vent hoods in the external wall or on the roof.

Duct connection: Ø 140 mm (5.5”)     Airflow: 600-650 m3/h


Working Environment

The system should be installed in a clean, constant-temperature and constant-humidity pre-printing environment with a temperature between 18 and 26°C (64.4 and 78.8°F) and a non-condensing relative humidity in the range of 40 to 60%.
To maintain such environmental standards an efficient heating/cooling and ventilating system may be required.


System Colour

Vianord offers all equipment in standard powder coating Vianord Black.

In addition, Vianord offers numerous ways you can personalize your system. In fact, Vianord offers the best customization options in the industry! This allows you to showcase your brand and company’s spirit in ways other companies can’t offer. You can choose your personal colour and have your logo, company name, or slogan pop.

Back to Category


31 July 2020


120x160cm | 47x63in, EVO 4, Processor

We use cookies to improve our website and your experience when using it. Cookies used for the essential operation of this site have already been set. To find out more about the cookies we use and how to delete them, see our privacy policy.

  I accept cookies from this site.
EU Cookie Directive plugin by