CE-013 Servo Motor (Fixing holes to be prepared in the factory)
Please note: This part is not a direct replacement for CE-113.
Prior to ordering make sure you check what part is currently installed in your equipment.
Servo motors or “servos”, as they are known, are motors paired with a position encoder that provide position and speed feedback with high precision. They are controlled by a Servo drive which monitors the feedback from the servo motor and automatically adjusts its output to correct for differences between the commanded value and actual.
Note: Fixing holes to be prepared in the factory.
G/SS2CYL 400W 200VCA
R88MG40030HS2
Please note: This part is not a direct replacement for CE-013.
Prior to ordering make sure you check what part is currently installed in your equipment.
Equipment Model | Ref 1 | Ref 2 | Ref 3 | Ref 4 | Ref 5 |
Classic 3P | M1 | M4 | M5 | ||
Classic 4 P | M1 | M4 | M5 | ||
Evo 3 IP | M1 | M2 | M3 | M4 | M5 |
Easy to plate Evo 3 IP D | M1 | M2 | M3 | M4 | M5 |
Easy to plate Evo 3 IP I | M1 | M2 | M3 | M4 | M5 |
Evo 4 IP | M1 | M2 | M3 | M4 | M5 |
Easy to plate Evo 4 IP D | M1 | M2 | M3 | M4 | M5 |
Easy to plate Evo 4 IP I | M1 | M2 | M3 | M4 | M5 |
Evo 5 IP | M1 | M2 | M3 | M4 | M5 |
Easy to plate Evo 5 IP D | M1 | M2 | M3 | M4 | M5 |
Easy to plate Evo 5 IP I | M1 | M2 | M3 | M4 | M5 |
EVO 5 BP | M4 | M5 | |||
Easy to plate EVO 5 BP D | M4 | M5 | |||
Easy to plate EVO 5 BP I | M4 | M5 | |||
620 | M1 | M2 | M3 | ||
621 | M1 | M2 | M3 | ||
830 | M1 | M2 | M3 |
Suitable for the following equipment models: | |
---|---|
CLASSIC 3 P | |
CLASSIC 4 P | |
EASY TO PLATE EVO 3 IPD | |
EASY TO PLATE EVO 3 IPI | |
EASY TO PLATE EVO 4 IPD | |
EASY TO PLATE EVO 4 IPI | |
EASY TO PLATE EVO 5 BPD | |
EASY TO PLATE EVO 5 BPI | |
EASY TO PLATE EVO 5 IPD | |
EASY TO PLATE EVO 5 IPI | |
EVO 3 IP | |
EVO 4 IP | |
EVO 5 BP | |
EVO 5 IP | |
Spare Part Type | |
Electrical Component | |
Spare Part Group | |
Motor | |
Stock Type | |
Standard Stock |