EVO 4 BP

This unit can be used as core module to a fully automate Easy to Plate™ system.

One of the most important feature of the Easy to Plate™ is the modularity concept, in other words, each unit is an independent piece of equipment buyable separately with the possibility of being upgraded and attached to one other to compose an all-in-one automatic unit. This gives you two choices: buy the whole automatic line at once, or amortize the investment and buy the different units over a longer time frame.

This System is suitable for analogue and digital, polyester backed, solvent-washable photopolymer Flexo plate.

It is designed to work in a standard “drum-to-drum” configuration where fresh solvent is supplied to the washout unit from a drum and the saturated dirty solvent is pumped from the unit to a recovery drum. It has been tested with conventional alternative solvents, with flashpoint above 62°C (144°F). The system's installation kit includes two Ø 16 mm - 5 mt solvent hoses with fittings, one level switch for the fresh solvent drum and another for the used solvent drum. Please note that if you intend to use your this system with permanently installed tanks, special level switches may be required.

The system provides Early Alerts when the time to replace an over-stressed part, causing too much risk, has come. This innovative function allows users to intentionally replace parts that are tired, aged, and degraded just before they fail. More than one hundred parts, critical to the uptime of the system, have been identified and data relative to their maximum-lifetime-expectationstored in the software.

Remote-Monitoring and Remote-Diagnostics (to be purchased separately); The concept of automation symbolises high quality and productivity, so ensuring you experience minimal downtime, for Vianord is essential. For that reason, this EVO system may be fitted with an Industrial VPN Gateway with dedicated hardware designed to offer Vianord Certified Engineers remote access, across the Intern et. This innovative system will help you keep uptime high, maintenance costs low, and extend the system’s useful life.

Washout Unit: 407 x 220 x 115 cm - (160.2 x 86.6 x 45.3”)
Exit Table: 214 x 220 x 115 cm- (84.33 x 86.6 x 45.3”)

Total System: 621 x 220 x 115 cm- (244.53 x 86.14 x 75.43”)

System Weight (net)

2560 Kg (5632 lb)

Light Packing on Pallets is preferred and recommended when the system requires a full truckload and is shipped just within Europe.
Dimensions
Washout Unit:
432 x 226 x 135 cm - (170.1x 89 x 53.1”)
Exit Table:
245 x 226 x 135 cm - (96.46 xx 90 x 53.1”)

Industrial Wooden Crates are favoured if the system must withstand multiple transhipments during transport and is mandatory when shipped outside the continent.
Dimensions
Washout Unit:
426 x 227 x 167cm (167.7 x 89.4 x 65.7”)
Exit Table:
258 x 227 x 167 cm - (101.57 x 89.4 x 65.7”)

The dimensions mentioned above are for reference only; packaging dimensions may vary depending on the packing company hired for the job.

Light Packing on Pallets
Washout Unit: 2210Kg - (4872Ib)
Exit Table: 845Kg (1873Ib)

Industrial Wooden Crates
Washout Unit: 2600Kg - (5732Ib)
Exit Table: 925Kg (2039Ib)

The weights mentioned above are for reference only; packaging waight may vary depending on the packing company hired for the job.

Power Supply (field configurable)
360 / 440 Volt – 50 / 60 Hz - 3Ph / N / PE - 207 / 243 Volt – 50 / 60 Hz - 3Ph / PE

Current (nominal load)
15 A (360/440 Volt configuration) - 26 A (207/243 Volt configuration)

Power Rating (nominal)
9 Kw

Connecting Wires
5 x 4 mm² (360/440 Volt configuration) - 4 x 6 mm² (207/243 Volt configuration)

Grounding

< 0.1 Ω

To perform to the best of its possibilities, the system requires a continuous and stable supply of compressed air at a pressure of at least 7 bar (101.5 psi) and not more than 10 bar (145 psi), with pressure dew point 3°C and max. residual intake oil content of < 0.01 mg/m3. Consider also an average consumption of 70 l/hr. The system installation kit includes a 5-meter - Ø 6mm air connecting pipe for push-in fitting.

The unit is equipped with a well-designed exhaust system that collect and conveys vapours and fumes from the different sections the machine and discharge them as quickly and silently as possible. The blower in the systems has sufficient power to vent the entire equipment when the tube supplied is connected directly to a vent hoods in the external wall or on the roof.

Duct connection: Ø 140 mm (5.5”) Airflow: 600-650 m³/h

The system should be installed in a clean, constant-temperature and constant-humidity pre-printing environment with a temperature between 18 and 26°C (64.4 and 78.8°F) and a non-condensing relative humidity in the range of 40 to 60%. To maintain such environmental standards an efficient heating/cooling and ventilating system may be required.

Vianord offers all equipment in standard powder coating Vianord Black.

In addition, Vianord offers numerous ways you can personalize your system. In fact, Vianord offers the best customization options in the industry! This allows you to showcase your brand and company’s spirit in ways other companies can’t offer. You can choose your personal colour and have your logo, company name, or slogan pop.